Cygnus W1 Probe Handler
Designed for work-class ROVs and the option of either a T-bar or Fish Tail handle. This probe handler provides 15 degrees of movement in both planes, allowing optimal alignment thanks to its double jointed coupling.
Designed for work-class remotely operated underwater vehicles and constructed from 316 stainless steel, this probe handler benefits from:
- Optimal alignment thanks to the double jointed coupling, providing 15 degrees of movement in both planes guided by four pins
- Shock absorbing spring, reducing any impact
- Misalignment will be taken up by the coupling, resulting in less movement of the manipulator arm position
- Can be held by a manipulator arm by either a T-bar or Fish Tail handle.
|Size||170 x 150 x 90 mm (exc. handle)|
|Weight in Air||5 kg|
|Depth Rating||500 m|
|Material||316 stainless steel|
|Spring Force||15 kg spring starts to compress|
|Probe Types||2.25 MHz 13 mm with membrane (3.5 and 5 MHz at special request)|
|Probe Cable||5 m double jacket coaxial (other lengths at special request)|
|Warranty||3 years on tester
6 months on probes
When ordering the W1 Probe Handler you must order the appropriate probe separately.
|S2C 2.25MHz Probe for M5 ROV (P/N 001-8364)|
|S2C 2.25MHz Probe with Nosecone for M4 ROV (P/N 001-8317)|
1 review for Cygnus W1 Probe Handler
Aug 01, 2017 1:33 PM
We have used the probe handler W1 on a few projects in the North Sea and Baltic Sea with our ROV Panther XTP and it has proved to be a very useful and productive tool allowing us to carry out a UT reading within seconds whether it was probing a flat surface or a rounded surface, due to its design it is the perfect handle for subsea UT probing.